XADO Atomic conditioner Maximum power steering and the hydraulic equipment

Description

The atomic Maximum for Diesel Truck metal conditioner for the power steering and the hydraulic equipment
It is intended for repair repair and protection against wear of the power steering of trucks and other hydraulic equipment. An innovative new generation 2-component product that combines the benefits of a metal conditioner and a 3rd generation revitalizer.
-
Increases pump performance
-
Reduces effort on the steering wheel
-
Eliminates the howl of the pump caused by operation
-
Improves the clarity of the power steering in 50-100 km after application
-
Reduces noise and vibration of the hydraulic system pump
-
Increases the working pressure of the hydraulic system
-
Protects parts from operation at low oil levels
Application
The required amount must be pre-dissolved * in ~ 150 ml of hydraulic fluid heated to a temperature not lower than 35 ° C.
The resulting mixture is introduced into the liquid heated to operating temperature in the tank of the power steering.
After application of the means at the included engine in 2-3 min. To turn a steering wheel within 5 min.
Before using the tool should REPLACE the fluid in the power steering and drive at least 200 km:
-
if the liquid is contaminated (opaque, changed the original color, etc.)
-
the fluid has worked more than 40,000 km (more than 3 years) or its service life is unknown.
Notes
A characteristic feature of the beginning of revitalization is the improvement in the operation of the steering mechanism (reduction of effort on the steering wheel, clarity of work, noise reduction) from the first kilometers.
The tool is intended for use in a hydraulic system does not exceed a volume of 5 liters.
The protective coating is active for 100,000 km, after which re-treatment is recommended.
Dosage:
System volume, l.
3-5
5-10
10-15
Number of syringes 30 ml, pcs.
1
2
3
Processing scheme
Once
Once
Once
Packaging
Syringe 30 ml, article XA 40016